Setting the alarm times and
mode
Note:
7
You can select the »Alarm Setup«
menu also by pressing and holding down
»Mode/Alarm« in stand by mode.
1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 akt«.
2 Open the menu with »MENU«.
3 Select the option »System« with »r Tuning/
Skip e« and confirm by pressing »Select/i«.
4 Select the option »Alarm« with »r Tuning/
Skip e« and confirm by pressing »Select/i«.
– Display: »Alarm Setup« flash.
5 Press »Select/i« drücken.
– Display: »Alarm Wizard« and »Alarm
Off«.
6 Activate the alarm stand-by with »r Tuning/
Skip e« (»Alarm On«) and confirm by
pressing »Select/i«.
– Display: »On time«, the hours flash.
7 Set the hours with »r Tuning/Skip e« and
confirm by pressing »Select/i«.
8 Set the minutes with »r Tuning/Skip e« and
confirm by pressing »Select/i«.
9 Select the desired alarm mode (Daily, Once,
Weekends or Weekdays) with »r Tuning/
Skip e«.
Note:
7
If the alarm is set to „Once“, select the
date (day, month and year) with »r Tun-
ing/Skip e« and confirm by pressing
»Select/i«.
10 Select alarm (»Buzzer« = signal tone,
»DAB« = DAB station or »FM« = FM station)
with »r Tuning/Skip e« and confirm by
pressing »Select/i«.
Note:
7
If the alarm is set to »DAB« or »FM«, then
select the desired station (only if stations are
stored on presets 1 to 10) by using »r Tun-
ing/Skip e« or select the option »Last
listened« (the last listened station) and
press »Select/i« to confirm.
11 Select the alarm volume with »r Tuning/
Skip e« and confirm by pressing »Select/i«.
– Display: »Alarm saved«.
12 Press »Menu« to end the setting.
– Display: »e« or »§«.
Interrupting the alarm
1 Press any button – except »ON/OFF« – while
the alarm is sounding.
– Display: »e« or »
§
« flash.
– The alarm (signal tone or radio) stops.
Note:
7
The alarm will sound again depending
on how often a button has been pressed
(1 time = after 5 minutes, 2 times = 10 min-
utes, 3 times = 15 minutes, 4 times = 30 min-
utes. The total alarm time in 90 minutes.
Cancelling alarm stand-by
1 Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
§
«.
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating and deactivating the
alarm
1 Press »ON/OFF« to switch off the device.
2 Press »»Mode/Alarm«« to deactivate the
alarm stand-by.
– Display: »Alarm off« and »e« or »
§
«
disappears.
– The set alarm time is saved
3 Press »Mode/Alarm« to reactivate the alarm
stand-by.
– Display: »Alarm on« and »e« or »
§
«.
To Next Page
Loading...
