Grundig TR 2500 DAB+ - Settings; Programming FM Radio Stations - Manually; Setting the Clock Format (12 or 24 hours)

21
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Programming FM radio stations –
manually
1 Select the input source FM with »Mode/
Alarm«.
2 Open the menu with »Menu«.
3 Confirm the option »Scan settin
g
« by
pressing »Select/i«.
– Display: »Stron
g
stations«.
Note:
7
You can select whether the device will scan
radio stations with weak signal (display
»Stron
g
stations onl
y
«) or all ra-
dio stations (display: »All stations«).
4 Select the desired option with »r Tuning/
Skip e« and confirm by pressing »Select/i«.
5 Press »Menu« to switching off the menu
6 Press and hold down »r Tuning/Skip« or
»Tuning/Skip e« to search the desired radio
station.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
press briefly »r Tuning/Skip« or »Tuning/
Skip e« until you have found the frequency you
want.
– The frequency changes in steps of 50 kHz.
7 To store the FM radio station on a preset, press
and hold down the required preset button »1«
to »5«, until »Preset 2 stored« appears.
Note:
7
Press »+5 eII« and the required preset but-
ton »1« to »5« for presets 6 to 10.
Setting the clock format
(12 or 24 hours)
1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 akt«.
2 Open the menu with »Menu«.
3 Select the option »S
y
stem« with »r Tuning/
Skip e« and confirm by pressing »Select/i«.
4 Select the option »Time« with »r Tuning/
Skip e« and confirm by pressing »Select/i«.
– Display: »Set Time/Date«.
5 Select the option »Set 12/24 hour« with
»r Tuning/Skip e« and confirm by pressing
»Select/i«.
– Display: »Set 24 hour«.
6 Select the desired clock format (12 or 24
hours) by pressing »r Tuning/Skip e«.
7 Press »Select/i« to confirm the setting.
8 Press »Menu« to end the setting.