Grundig VISION 3 32-3830 T User Manual

ENGLISH
35
SPECIAL SETTINGS
------------------------------------------------------------------
Tuning digital television stations
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels.
The television channel can be set directly or using the search.
New TV or radio stations are automatically added to the end of the
channel list.
Tuning channels using the search
1 Open the »MAIN MENU« menu with »i«.
2 Select »Setup« with »P+« or »P-« and press »OK« to confirm.
3 Select »Auto tuning« with »P+« or »P-« and press »OK« to con-
firm.
– The »COUNTRY« menu appears.
4 Press »P+«, »P-«, »
4
« or »
3
« to select the country and »OK« to
confirm.
– The »AUTOMATIC SEARCH« menu appears, and the search
for digital TV stations begins. This may take several minutes
depending on the number of television stations received.
– The search is finished when the last line of the menu shows the
number of stations found.
Note:
You can stop the search by pressing »i«.
5 Press »i« to end the setting.
Tuning the television channels by entering the
channel numbers
1 Open the »MAIN MENU« menu with »i«.
2 Select »Setup« with »P+« or »P-« and press »OK« to confirm.
3 Select »Manual tuning« with »P+« or »P-« and press »OK« to
confirm.
– The »MANUAL SEARCH« menu appears.
4 Enter the channel number with »
4
« or »
3
«
or
Enter it directly »1 ... 0« and press »OK« to confirm.
– The search is finished when the channels found appear in the
list.
5 Press »
3
« (yellow) to finish the setting.
6 Press »i« to end the setting.
SETUP
Manual tuning
Auto tuning
Select
Back Exit
SETUP
Manual tuning
Auto tuning
Select
Back Exit

Grundig VISION 3 32-3830 T Specifications

General

Brand	Grundig
Model	VISION 3 32-3830 T
Category	TV
Language	English