28
Connecting a PC
1 Connect the socket »PC-IN VGA« on the television to the corre-
sponding socket on the PC using a VGA cable.
2 Connect the socket »PC AUDIO-IN« on the television to the
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« channel with »P+« or »P-« and press
»
OK« to confirm.
Settings for the PC
1 Press »i« to open the »INFO« menu.
– The »INFO« menu appears.
2 Select »SETUP« with »P+« or »P-« and press »OK« to confirm.
3 Select the function or setting you want with »P+« or »P- « and
press »
4
« or »
3
« to execute it.
– Options:
»Auto position« For automatic PC configuration;
»H. Position« Adjust the picture position horizontally;
»V. Position« Adjust the picture position vertically;
»Clock« Set the cycle frequency;
»Phase« Remove horizontal flicker, blurring and hori-
zontal lines.
4 Press »i« to exit the »SETUP« menu.
PC MONITOR MODE
----------------------------------------------------------
SETUP
Select
Back
Exit
Auto position
H Position
V Position
Clock
Fase
To Next Page
Loading...
