30
SPECIAL SETTINGS
------------------------------------------------------------------
Fine tuning television channels
The television automatically tunes itself to the best possible recep-
tion. You may need to carry out manual fine tuning in areas where
there is poor reception.
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »SETUP« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
3 Select »Fine tuning« with »P+« or »P-« and set it with »
4
«
or »
3
«.
4 Select »Store« with »P+« or »P-« and confirm with »
4
« or »
3
«.
– The »Stored« message appears.
5 Press »i« to finish the setting.
Setting the television channels by entering the
channel numbers
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »SETUP« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
3 Select »Program no« with »P+« or »P-« and set the preset chan-
nel with »
4
« or »
3
«.
4 Select »Channel« with »P+« or »P-«.
5 Press »OK« to choose between »S« (special channel) and »C«
(channel).
6 Press »
4
« or »
3
« to switch up and down channels or use
»
1…0« to enter the channel number directly.
Note:
The current system is automatically displayed in the »System« line.
Select »System« with »
P+« or »P-« if the colour or sound are in-
correct. Select the setting required with »
4
« or »
3
«.
7 Select »Store« with »P+« or »P-« and confirm with »
4
« or »
3
«.
– The »Stored« message appears.
Note:
To set the other television stations, repeat steps 3 to 7.
8 Press »i« to finish the setting.
SETUP
Back
Exit
Channel C 03
System BG
Fine tuning 0
Search as
Program no P01
Store
Autoprogram
SETUP
G
0 -
G
9
Back
Exit
Channel C 03
System BG
Fine tuning 0
Search
as
Program no P01
Store
Autoprogram
SETUP
G
0 -
G
9
C/S
Back
Exit
Channel C 03
System BG
Fine tuning 0
Search
as
Program no P01
Store
Autoprogram
SETUP
Store
Back
Exit
Channel C 03
System BG
Fine tuning 0
Search
as
Program no P01
Store
Autoprogram
To Next Page