22
Features and Specifications
• Dual Mono configuration
• Zero global negative feedback
• 20 (Stereo) or 40 (Mono version) very high current bipolar output transistors
• 440,000 µF (Stereo) or 880,000 µF (Mono version) capacitor bank
• Balanced dual differential class A input circuitry followed by a high-speed voltage amplifying
Class A stage
• Fully regulated low noise power supply for all voltage amplifying stages
• DC servo coupling
• Frequency-independent damping factor
• Polypropylene capacitors used for local power supply decoupling
• Four-layer up to 70µm copper printed circuit boards
• Custom made 1350VA toroidal transformer
• Separate power supply for digital and analog circuits
• Soft Start turn-on prevents triggering of fuses in the home electrical system
• Gold-plated Neutrik XLR socket for one balanced input per channel
• Gold-plated custom-made binding posts
• 12VDC link in for power up and down
• Automatic Green Bias setting or manual Low/High bias
• Non-invasive protection system
• RGB LED bar indicating Low/High Bias status
• Standby current consumption < 0.5W
• EU CE approval
• Designed and built in Denmark
Specifications Stereo version:
• 2 x 50W @ 8, 2 x 100W @ 4, 2 x 190W @ 2 at 115V/230V AC supply
• Output impedance: 0.015
• Bandwidth (-3dB): 0.3 Hz - 350 kHz
• Power Supply Capacity (both channels): 440,000µF
• Gain: +31.0dB
• Input Impedance, balanced (20-20,000 Hz): 20 k
Specifications Mono version (each Mono unit):
• 1 x 50W @ 8, 1 x 100W @ 4, 1 x 200W @ 2 at 115V/230V AC supply
• Output impedance: 0.0075
• Bandwidth (-3dB): 0.3Hz – 350 kHz
• Power Supply Capacity (each Mono unit): 440,000µF
• Gain: +31.0dB
• Input Impedance, balanced (20-20,000 Hz): 20 k
Dimensions:
• 47cm X 24cm X 46cm (W x H x D), 45 kg net. each cabinet.
Specifications can be changed without notice.
To Next Page
Loading...
