Chapter 1: Safety Precautions
Install and Operate Electrical Equipment Properly
• Electrical controls must be installed by a qualified electrician
and must meet the standards set by applicable local codes
(National Electrical Code for the US, Canadian Electric
Code, or EN60204 along with applicable European Direc-
tives for Europe).
• Lock-out power source before making adjustments, cleaning,
or maintaining equipment.
• Make sure all equipment is properly grounded.
ST-0027–4
Install and Operate Equipment Properly
• Before attempting to remove and reinstall the fan blade, con-
tact GSI for the recommended procedure.
ST-0033–2
PNEG-2016 Tower Dryer Heat Reclaimer
9
To Next Page
Loading...