1. Safety
PNEG-2381 2000 Series U-Trough Bin Sweep Auger Unload System (72' - 78') 7
Maintain Equipment and Work Area
• Understand service procedures before doing work. Keep area
clean and dry.
• Never service equipment while it is operating. Keep hands, feet
and clothing away from moving parts.
• Keep your equipment in proper working condition. Replace worn
or broken parts immediately.
Sharp Edge Hazard
• This product has sharp edges, which can cause serious injury.
• To avoid injury, handle sharp edges with caution and always use
proper protective clothing and equipment.
Rotating Auger Hazard
• Keep clear of rotating augers and moving parts.
• Do not remove or modify guards or covers.
• Lock-out power source before making adjustments,
cleaning, or maintaining equipment.
• Failure to follow these precautions will result in
serious injury or death.
Install and Operate Electrical Equipment Properly
• Electrical controls must be installed by a qualified electrician and
must meet the standards set by applicable local codes (National
Electrical Code for the US, Canadian Electric Code, or EN60204
along with applicable European Directives for Europe).
• Lock-out power source before making adjustments, cleaning,
or maintaining equipment.
• Make sure all equipment and bins are properly grounded.
To Next Page
Loading...
Need help?
General
