I-9105R
Intelligent Reflective Beam Detector
Installation and Operation Manual The Intelligent Solution
2
3. Built-in microprocessor enables intelligent judgment about fire
alarm and fault.
4. The detector can calibrate automatically, which ensures a single
person complete adjustment in short time. It’s also convenient to
operate.
5. Self-diagnosis function can monitor the inner fault.
6. Automatic compensation for factors weakening received signals,
such as a certain of dust contamination, positional excursion and
ageing transmitter.
7. Simple to control and operate by integrating digital bus protocol.
8. Electronically addressed. The address can be programmed in field.
9. Two sensitivity levels can be set in field.
10. The detector’s optical pathway is designed with strong
anti-interference ability.
11. SMT processing technology.
12. Attractive and decent appearance.
13. Standard: EN 54-12.
III Technical Specifications
1. Operating Voltage: 24VDC (15V~28V)
2. Operating Current:
Power current: Commission current ≤20mA
Standby current ≤8mA
Alarm current ≤12mA
3. Loop Output:
Loop Voltage: 24V (15V~28V)
4. Fire, fault contact output
Fire output contact: contact capacity is 28V/2A. Normally open in
normal state, closed in fire condition.
Fault output contact: contact capacity is 28V/2A. Closed in normal
To Next Page
