Need help?Do you have a question about the GST DC-9105E and is the answer not in the manual?
Details environmental requirements and unsuitable locations for detector and reflector mounting.
Provides guidelines on optimal mounting heights and positions based on space dimensions.
Covers general installation aspects and the procedure for setting the optical path length.
Details surface mounting methods, including conduit embedded and surface-mounted options.
Specifies reflector mounting positions and the number of reflectors needed based on distance.
Provides specific wiring instructions and cable type recommendations for detector connections.
Outlines the detailed procedure for commissioning the beam detector using a magnet tool.
Describes the process for testing the fire alarm function using IR light filters.
Explains how to perform fault testing using IR light filters to check fault reporting.
Summarizes warnings, connection, calibration, and mounting practices for safe operation.
Details how to read detector information such as address and sensitivity using a programmer.
Explains the procedure for setting the detector's sensitivity level using a programmer.
Describes how to set the optical path length type for the detector via a programmer.
Covers automatic compensation for light and self-diagnosis capabilities of the detector.
Outlines detector checks, cleaning, recording, and testing requirements for upkeep.
Discusses the inherent limitations of smoke detectors in sensing various fire scenarios.
General| Brand | GST |
|---|---|
| Model | DC-9105E |
| Category | Security Sensors |
| Language | English |
To Next Page
