GST DC-9105E - Detector Mounting

DC-9105E Conventional Reflective Beam Detector
Installation and Operation Manual
10
Mounting
Distance
Length Type
5～20m
20
20～40m
40
40～70m
70
70～100m
100（factory default）
The detector can be set according to mounting distance with
four different optical path lengths. Refer to Section VIII Operation
for details.
b) Detector Mounting
The detector and reflector/s should be installed on two walls
oppositely and horizontally. Refer to Fig.8.
Mounting
Bracket
Detector
Reflector
Fig.8
The detector is surface-mounted with conduit embedded or
conduit surface-mounted.
(1) Conduit Embedded
a. Remove the detector's top cover.
b. Aligning the detector base with the back box, put it close