GSW SPACESAVER Series - User Manual

July 2017
Residen al Electric
Water Heater
Installa on Instruc ons and
Use & Care Guide
Keep this manual in the pocket on heater for future reference whenever maintenance, adjustment or service is required.
Retain your original receipt as proof of purchase.
DO NOT RETURN THIS UNIT TO THE STORE
Read this manual and the labels on the water heater before you install,
operate, or service it. If you have diffi culty following the direc ons, or
aren’t sure you can safely and properly do any of this work yourself:
• Schedule an appointment with a qualified person to install your water heater.
• Call our Technical Assistance Hotline at 1-888-479-8324 or visit
http:// www.hotwatercanada.ca. We can help you with installation, operations,
troubleshooting, or maintenance. Before you call, write down the model and
serial number from the water heater’s data plate.
Incorrect installa on, opera on, or service can damage the water heater, your house
and other property, and present risks including fi re, scalding, electric shock, and
explosion, causing serious injury or death.
Table of Contents Page
IMPORTANT SAFETY INFORMATION .................................3
GETTING STARTED ............................................................6
INSTALLATION ...................................................................7
TROUBLESHOOTING .......................................................16
MAINTENANCE ...............................................................19
REPAIR PARTS ..........................................................22
WIRE DIAGRAM ..............................................................23
100291161 (REV A)/2000547142

Summary

IMPORTANT SAFETY INFORMATION

Installation and Maintenance Safety Risks

Covers risks like electric shock, lifting hazards during installation and maintenance.

Operational Safety Risks

Addresses risks such as scalding water and improper temperature settings during operation.

INSTALLATION

Step 1: Verify Home Water Pressure and Thermal Expansion

Step 4: Connect Temperature and Pressure (T&P) Relief Valve;Pipe

Critical steps for installing the Temperature and Pressure Relief Valve and its discharge pipe.

Steps 5 & 6: Install Valves and Connect Water Supply

Steps 7 & 8: Fill Tank and Make Electrical Connections

Ensures tank is filled and guides safe electrical connections, especially for 6-gallon models.

Step 9: Adjusting the Water Heater Thermostat

Explains how to adjust the water heater's thermostat for the desired water temperature.

OPERATION

TROUBLESHOOTING

Diagnosing No Hot Water Issues

Guides on checking power, elements, and thermostats for no hot water problems.

Insufficient Hot Water or Slow Recovery

High Temperature, Low Pressure, and Valve Drips

MAINTENANCE

Routine Maintenance Overview and Schedule

Draining, Flushing, and Anode Rod Care

Heating Element and T&P Valve Maintenance

Step-by-step guide for replacing the heating element and maintaining the T&P Relief Valve.

GSW SPACESAVER Series Specifications

General

Brand	GSW
Model	SPACESAVER Series
Category	Water Heater
Language	English