To Next PageTo Next Page
Need help?Do you have a question about the GSW WATER HEATING and is the answer not in the manual?
General| Brand | GSW |
|---|---|
| Model | WATER HEATING |
| Category | Water Heater |
| Language | English |
Details the features and intended use of the John Wood storage booster tanks.
Specifies requirements for temperature and pressure relief valves for safety.
Explains the procedure for annually checking the relief valve's operation.
Warns of the hazard of moving the tank with insufficient personnel.
Advises caution regarding potential hydrogen gas buildup in unused tanks.
Emphasizes the need to install the tank according to local codes and instructions.
Provides guidance on selecting a safe and suitable location for tank installation.
Warns against using non-potable water or toxic chemicals in the tank.
Specifies requirements for a compatible circulator pump.
Outlines the steps for connecting plumbing for the storage tank system.
Advises against applying heat directly to tank fittings during sweat connections.
Explains electrical wiring requirements and connections for the tank.
Provides instructions on how to properly fill the storage tank with water.
Details thermostat settings and scald injury prevention.
Outlines the steps for operating the storage booster tank post-installation.
Describes how to adjust the tank's thermostat for desired water temperature.
Provides detailed instructions on how to test the temperature and pressure relief valve.
Warns about the danger of hot water discharge during T&P valve testing.
Explains the process for draining and flushing the tank for maintenance.
Explains the function of the anode for corrosion protection and its maintenance.
Provides detailed steps for checking and replacing the anode for tank protection.
Lists conditions that must be met for GSW to cover warranty claims.
Details how to submit a warranty claim, including required information.
