EasyManua.ls Logo

GT Grade - Page 111

Default Icon
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
111
PART 2
Carbon Fiber Forks & Stems
Section A. Important Safety Information
GT Bicycle Owner’s Manual
WARNING
DO NOT EXCEED THE MAXIMUM STACK HEIGHT (55mm) OR LOCATE SPACERS ON TOP OF THE
STEM. MAXIMUM STACK HEIGHT is a distance spacers may be stacked between the top of the head
tube and the bottom of the stem. Exceeding this distance with spacers or locating spacers on top of
the handlebar stem can place significant stress on the steerer tube. It could break.
Always tighten fasteners of the headset/stem system and brake with a torque wrench. Observe the
manufacturer’s torque limits and loctite (thread locking compound) recommendations for each
component of the fork, stem, brake and handlebar system. Ask your Authorized GT Dealer to help you.
Over-tightening may cause damage and lead to fork or component failure.
For technical information and specifications, see http://www.gtbicycles.com
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT IF YOU IGNORE THESE
WARNINGS.

Table of Contents

Related product manuals