182
PART 3
(A) Quick Release Type
138692 Rev 0 (04/22)
8. Install Front Wheel
GT Bicycle Owner’s Manual
Be sure that the axle at both ends of the hub is fully engaged with the dropouts on the fork. Push down
on the front of the bike and hold the bike upright. When fully and properly engaged you will see that the
wheel is centered in the fork, that there is the same amount of space between the tire and the inside of
the fork on both sides.
Next hold the lever end of the quick release open and stationary. Position the quick release lever so that
it is behind the fork and when closed the lever does not make contact with any part of the fork.
To Next Page
Loading...
