Care and maintenance
CAUTION : Remove the Isolator key and Battery before carrying out any
maintenance.
Do not accidentally turn the unit on while cleaning it.
To ensure long and reliable service, carry out the following maintenance
regularly:
Clean inside the mower after use. Remove any grass, dirt or debris from around the blade
and guards using a suitable wooden or plastic tool.
Wipe clean with a dry cloth or soft brush. Do not use water, solvents, polishes, or abrasive
materials to clean the mower. Do not immerse in water
Before use, check for obvious defects such as loose, dislodged, worn or damaged parts. If
necessary carry out any repairs before using the mower again.
Check that covers and guards are correctly tted and undamaged.
Before use, visually check the condition of the cutting blade.
Don’t use on concrete, tar macadam or other rough surfaces.
Don’t pick up pieces of string, stones or fabrics with the unit.
Beware of raised areas such as paving stones or manhole covers that can damage the
blades.
Always charge the battery after use, and every 3 months if stored for a long period of time.
Store in a dry place. Do not expose to moisture.
Apply oil or spray lubricant to the straight blade and bearings.
Do not place any objects on top of the unit when stored.
For storage in conned spaces the handles can be removed from the mower
Dis-connect the power cord and ex the lower handles to remove from the frame locating
lugs
If the product needs to be repaired or replaced only use parts which
are approved by the manufacturer.
Replacement batteries can be purchased from Grey Technology.
Tel : 0870 7944001 www.greytechnology.co.uk
Gtech helpline : 0870 7944001 email: support@greytechnology.co.uk
To Next Page
Loading...
