Ready for your rst journey? Before you go out adventuring check that the following steps have been
completed in accordance with the instructions in the assembly section. We want to ensure you get
the most out of your new eBike and by following the list below you will be ready to get out there
with condence.
Operation
Before you start riding, check that:
1. The wheels are mounted properly.
Yes. If not
see page
2. The brakes work properly.
3. The seat post is at the correct height.
4. The saddle is comfortable.
5. The belt drive is correctly tted.
6. The bolts, nuts and screws are tightened.
7. The pedals are rmly attached.
8. The air pressure in the tyres is correct.
9. The battery is charged and attached.
Charging the battery ..................................................................... 15
Turning on your eBike ................................................................... 16
Brake controls .............................................................................. 18
22/32
37-40
9
10
29
46
20
15
To Next Page
Loading...
