Charging battery
When the lights rapidly cycle red, recharge
the battery.
Alternatively, you can remove the battery from
your eBike. Plug the charger into the wall, then
remove the rubber charging point cover and
connect the charger to the battery.
After 3 hours all the LEDs turn green, then, once
charging is complete they will turn off.
1. You can charge the battery while it is still
attached to your eBike.
2. Plug the charger into the wall, then remove
the rubber charging point cover and connect
the charger to the battery.
Always fully charge your battery before storing. For optimum performance,
we recommend that you store the battery indoors during the winter months.
3
hours
1
2
To Next Page
Loading...
