Troubleshooting
15
Trimmer fails to operate 1. Recharge battery.
2. Check switch. It will click if operating
correctly.
3. Blade is jammed
Cutting blade will not cut 1. Blade is either worn or damaged.
2. Replace blade.
Blade will not move Replace blade
Cutting time has reduced 1. Use lighter cutting action and cut
in several stages.
2. Fully discharge and recharge battery.
3. Replace blade.
Abnormal vibrations 1. Check the hub screw is securely
screwed in.
2. Check the blade is installed.
3. Check if any obstacle is preventing
normal rotation of the hub.
Trimmer stops when cutting 1. Wait for automatic cut out to
reset. Use lighter cutting action.
2. Check blade and remove
any debris.
3. Charge battery.
LEDS show solid red 1. The grass trimmer has jammed.
2. Check blade and remove
any debris.
If this doesn’t solve your problem don’t worry, we will help.
Go to www.gtech.co.uk or call 01905 345 891
To Next Page
Loading...
