To Next PageTo Next Page
Need help?Do you have a question about the Guardian Fall Protection Beamer 2000 and is the answer not in the manual?
General| Brand | Guardian Fall Protection |
|---|---|
| Model | Beamer 2000 |
| Category | Safety Equipment |
| Language | English |
Lists applicable OSHA and ANSI standards for fall protection systems.
Defines Qualified Person, Competent Person, and Authorized Person roles.
Use for fall arrest systems, max 1 load, 5000 lbs structure load, 6' free fall limit.
Prevents workers from reaching fall hazards, 1000 lbs structure load, no free fall.
Use for safely recovering workers from confined spaces, 3000 lbs structure load.
Explains calculating fall clearance with safety factors, deceleration, and user height.
Advises minimizing swing fall hazards by working close to anchor point.
Lists materials used in construction such as High Strength Bar and Aluminum.
Ensures PFAS compatibility, selects location, and checks beam suitability before installation.
Guides on clamping, adjusting, and securing the Beamer Anchor to a beam.
Instructs to clean the Beamer 2000 with plain water and mild soap.
Inspect for deficiencies like corrosion, deformation, sharp edges before each use.
Requires inspection by a Competent Person every 6 months and recording.
Product lifetime is indefinite if it passes all inspection requirements.
Warns of serious injury/death for non-compliance and emphasizes Competent Person judgment.
Emphasizes assessing workplace conditions by a Competent Person for equipment selection.
Mandates selection, installation, and design compliant with federal, state regulations.
Stresses compatibility, self-locking/closing features for harnesses and connectors.
Advises reading and following manufacturer's instructions for use, maintenance, and inspection.
Details monthly inspection record keeping by a Competent Person.
Lists applicable OSHA and ANSI standards for fall protection systems.
Defines Qualified Person, Competent Person, and Authorized Person roles.
Use for fall arrest systems, max 1 load, 5000 lbs structure load, 6' free fall limit.
Prevents workers from reaching fall hazards, 1000 lbs structure load, no free fall.
Explains calculating fall clearance with safety factors, deceleration, and user height.
Advises minimizing swing fall hazards by working close to anchor point.
Discusses compatible and incompatible connector configurations to prevent roll-out.
Identifies as Type A anchorage connector with service temperature and MBS.
Lists materials used in construction such as stainless steel and aluminum.
Ensures PFAS compatibility, selects location, and checks beam suitability before installation.
Guides on clamping, adjusting, and securing the Beamer Anchor to a beam.
Instructs to clean the Beamer BBC with plain water and mild soap.
Inspect for deficiencies like corrosion, deformation, sharp edges before each use.
Requires inspection by a Competent Person every 6 months and recording.
Product lifetime is indefinite if it passes all inspection requirements.
Warns of serious injury/death for non-compliance and emphasizes Competent Person judgment.
Emphasizes assessing workplace conditions by a Competent Person for equipment selection.
Mandates selection, installation, and design compliant with federal, state regulations.
Stresses compatibility, self-locking/closing features for harnesses and connectors.
Advises reading and following manufacturer's instructions for use, maintenance, and inspection.
Details monthly inspection record keeping by a Competent Person.
Lists applicable OSHA and ANSI standards for fall protection systems.
Defines Qualified Person, Competent Person, and Authorized Person roles.
Use for fall arrest systems, max 1 load, 5000 lbs structure load, 6' free fall limit.
Prevents workers from reaching fall hazards, 1000 lbs structure load, no free fall.
Explains calculating fall clearance with safety factors, deceleration, and user height.
Advises minimizing swing fall hazards by working close to anchor point.
Discusses compatible and incompatible connector configurations to prevent roll-out.
Identifies as Type A anchorage connector with service temperature and MBS.
Ensures PFAS compatibility, selects location, and checks beam suitability before installation.
Guides on clamping, adjusting, and securing the Beamer Anchor to a beam.
Instructs to clean the Beamer Trolley Anchor with plain water and mild soap.
Inspect for deficiencies like corrosion, deformation, sharp edges before each use.
Requires inspection by a Competent Person every 6 months and recording.
Product lifetime is indefinite if it passes all inspection requirements.
Warns of serious injury/death for non-compliance and emphasizes Competent Person judgment.
Emphasizes assessing workplace conditions by a Competent Person for equipment selection.
Mandates selection, installation, and design compliant with federal, state regulations.
Stresses compatibility, self-locking/closing features for harnesses and connectors.
Advises reading and understanding all instructions before using equipment.
Details monthly inspection record keeping by a Competent Person.
