To Next PageTo Next Page
Need help?Do you have a question about the Guardian HALO and is the answer not in the manual?
General| Brand | Guardian |
|---|---|
| Model | HALO |
| Category | Safety Equipment |
| Language | English |
Person with accredited degree/certification & experience, proficient in planning fall protection systems.
Highly trained & experienced person assigned by employer to manage fall safety program, identify hazards, & stop work.
Person assigned by employer to work around or be subject to potential existing fall hazards.
Sufficient clearance below work surface needed to arrest fall before striking ground or obstruction.
Minimize swing fall hazards by working close to anchor point to avoid injury or death.
Ensure all PFAS components are selected and compatible with the Halo Web SRL by a Competent Person.
Ensure structure & work area are free of hazards like debris, rot, rust, sharp edges, or hazardous materials.
Position SRL housing at or above dorsal D-ring and at or below anchor point. Specifics for rebar hook included.
Attach SRL housing to anchor point or D-ring using the provided carabiner or equivalent.
Ensure 100% tie-off is maintained at all times, possibly requiring a backup system.
Failure to comply with regulations may cause serious injury or death. Do not alter or misuse equipment.
CP must assess workplace conditions, routes, and potential fall hazards before selecting equipment.
Select and install fall protection systems under CP supervision, compliant with regulations.
Harnesses and connectors must be compatible, self-locking, and self-closing. Avoid connecting them to each other.
A project-specific rescue plan is required. CP must train authorized persons on equipment use and hazard recognition.
Health, age, and fitness affect fall safety. Pregnant women and minors must not use this equipment.
Label displays Class 1, warnings, product name, standards, and QR code for more information.
Label includes Part #, Serial #, Date of Manufacture, warnings, usage instructions, specifications, and inspection details.
Inspect SRL for deficiencies like corrosion, damage, or illegible labels. Remove from service if defects are found.
Ensure work area is free of damage and hazardous materials and can support minimum loads.
CP must inspect SRL at least every 12 months. Record inspections in log and on inspection grid label.
Product lifetime is indefinite if it passes pre-use and CP inspections. Discard immediately if it fails inspection.
