28
Figure 3 on page 2 shows the maximum dimensions of the log splitter.
2.2 - Recommended oils2.2 - Recommended oils
2.2 - Recommended oils2.2 - Recommended oils
2.2 - Recommended oils
We recommend use of the following oils for the hydraulic cylinder:
SHELL TELLUS T22
ARAL VITAM GF22
SP ENERGOL HCP22
MOBIL DTE11 or equivalent
DO NOT USE OTHER GRADE OILS.DO NOT USE OTHER GRADE OILS.
DO NOT USE OTHER GRADE OILS.DO NOT USE OTHER GRADE OILS.
DO NOT USE OTHER GRADE OILS.
2.1 - Size of the logs to be split2.1 - Size of the logs to be split
2.1 - Size of the logs to be split2.1 - Size of the logs to be split
2.1 - Size of the logs to be split
Figure 2 on page 2 shows the maximum log sizes that can be split.
The diameter of the log is indicative: a small log can be difficult to split if it has knots or a particularly
tough fibre. On the other hand, if the wood has regular fibres it is not difficult to split logs with
diameters greater than the maximum shown in Figure 2.
It is important not to insist when the log doesIt is important not to insist when the log does
It is important not to insist when the log doesIt is important not to insist when the log does
It is important not to insist when the log does
not split on the first attempt, as the pump may be damaged by the overheating of the oil when thenot split on the first attempt, as the pump may be damaged by the overheating of the oil when the
not split on the first attempt, as the pump may be damaged by the overheating of the oil when thenot split on the first attempt, as the pump may be damaged by the overheating of the oil when the
not split on the first attempt, as the pump may be damaged by the overheating of the oil when the
machine is made to work under the maximum stress in the attempt to split excessively hard wood.machine is made to work under the maximum stress in the attempt to split excessively hard wood.
machine is made to work under the maximum stress in the attempt to split excessively hard wood.machine is made to work under the maximum stress in the attempt to split excessively hard wood.
machine is made to work under the maximum stress in the attempt to split excessively hard wood.
Lenght (mm) 765 915
Widht (mm) 300
Height (mm) 490
Weight (Kg) 35 40
Max. force (tons.) ~ 4
Hydraulic oil capacity (Lt.) ~ 2,6 ~ 3
Supply 230V 50Hz single-phase
Absorption 10A
Power 2Hp - 1,5KW
Average noise <= 71 dB(A)/1m.
Protective earphones
are not necessary
Log capacity (mm)Log capacity (mm)
Log capacity (mm)Log capacity (mm)
Log capacity (mm)
370370
370370
370
520520
520520
520
2 - TECHNICAL D2 - TECHNICAL D
2 - TECHNICAL D2 - TECHNICAL D
2 - TECHNICAL D
ATAATA
ATAATA
ATA
To Next Page
Loading...
Need help?
General
