EasyManua.ls Logo

Guinaz A2420 - Monitor Installation Guide; Wall Base and Connection Card Setup; Monitor Mounting and Disassembly

Guinaz A2420
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
G503145 - R00
9
Se recomienda instalar los teléfonos y monitores en lugares desde los cuales se escuche la llamada
en toda la vivienda, y que estén alejados de fuentes de calor (radiadores, estufas, etc.) o de ambientes
agresivos (cocinas, etc.).
Installing the monitor in places where calls can be heard all around the dwelling and far from heat sources
(radiators, heaters, etc.) or aggressive environments (kitchens, etc.) is recommended.
4
3
Colocación monitor:
A) Encajar sobre base mural.
B) Presionar hasta clipar.
Assembly of the monitor:
A) Assemble on the wall base.
B) Press down until it clips in.
Para desmontar el monitor:
A) Soltar el clip con un destornillador.
B) Empujar hacia arriba y luego hacia fuera.
Disassembly of the monitor:
A) Unclip with a screwdriver.
B) Move up and then outwards.
Configure la tarjeta de conexiones de la base
mural según se indica en la página 14, y conecte
el latiguillo del monitor.
Configure the connection card of the wall base
as indicated in page 14, and connect the
connector of the monitor.
1
Colocar la base mural en la pared mediante
cuatro tirafondos y conectar tarjeta de
conexiones.
Assemble this wall base panel on the wall
using four sleeper-screws and connect it to
the connection card.
2
INSTALACIÓN MONITORES. INSTALLATION OF MONITORS.

Related product manuals