EasyManua.ls Logo

Guldmann DH 2000 - Long-Term Storage Recommendations; Preventing Corrosion on the Hoist; Owner-Performed Maintenance Tasks; Service and Lifespan of DH 2000

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
4.03 Long-term storage
The hoist should be stored in cool rooms e.g. a basement.
The hoist should be stored at temperatures below 15 °C due to the risk of
running the batteries down. The Guldmann Service Team recommends that
the fuses are removed from the hoist when it is stored for long periods of
time.
4.04 How to prevent / avoid corrosion ?
The hoist should not be kept / remain in damp surroundings for long periods.
Water vapour might liquefy into water on the hoist, thus causing corrosion /
rust in the bearings.
The hoist should not be exposed to sudden cold or warmth. This means that
one should not take a cold hoist into e.g a hot bathroom.
The DH 2000 shall be ordered with a treatment / coating if it mainly is used in
agressive enviroment, eg. swimming baths.
In swimming baths and bathrooms where strong gasses may be present, the
hoist is particularly exposed to corrosion.
4.05 Maintenance which should be carried out by the owner?
Check at regular intervals that the lifting strap has no damages. If the lifting
strap is damaged, DH 2000 should not be used. The lifting strap must only be
exchanged by an atuhorized installer.
5.00 Service and Life Span
5.01 Life span and servicing of hoist
According to the international standard EN/ISO 10535 “Hoist for the transfer
of disabled persons - Requirements and test methods” a safety inspection of
the hoist must be performed at least once a year.
Servicing and estimation of life span are based on the annual service check
and maintenance carried out by a service engineer or by the Guldmann Ser-
vice Team.
The hoist has an expected life span of 15 years. The hoist must then be
assessed by qualied service staff as to its future use.
Spare parts lists and drawings are available from manufacturer or supplier.
5.02 Battery and fuses
Change of batteries and fuses should be carried out by a service engineer or
by the Guldmann Service Team.
© Guldmann GB-896/08/08 # 900662
© Guldmann GB-896/08/08 # 900662

Related product manuals