Guldmann GL5 - 6.00 Mobile Lifter Use; 6.01 Using the Sling

12
© Guldmann GB/US-1688/12/2011 • # 553658_4.01
© Guldmann GB/US-1688/12/2011 • # 553658_4.01
© Guldmann GB/US-1688/12/2011 • # 553658_4.01 © Guldmann GB/US-1688/12/2011 • # 553658_4.01
When charger is not in use, the spiral cable should be wound round the
charger bracket.
When the lifter has to be stored away, the charger should always be placed
on the lifter.
206 Accessoriesforthelifter
Liftingslings
Ask for special brochure from supplier or manufacturer.
300 DismantlingandTransport
301 Dismantlingthelifter
When the mast is lifted out of the base, the plug from the actuator should
always be connected to the mast. The battery box can be removed from the
mast before lifting the mast out of the base.
The battery box hangs unsupported on the mast. It is kept in position by the
plugs, so never turn the mast upside down when there are no plugs con-
nected to the mast.
302 Howtotransportthelifter?
The lifter can be dismantled for transport and storage, see section 3.1.
303 Howtopackagethelifterfortransport?
Guldmann recommends that the dismantled lifter is always transported in its
original packaging.
400 Maintenanceandstorage
401 Cleaningthelifter
Lifter and lifting hanger can be cleaned using a damp sponge. If the lifter is
dismantled and the battery box removed, the lifter can be washed using a soft
brush and soapy water.
The lifter should always be thoroughly wiped after washing.
Do not use chemicals or autoclaving to cleanse the lifter.
The charger must only be wiped using a dry cloth.
402 Storing
The lifter should be kept in a dry room, where the humidity does not exceed
70 per cent. This is why the lifter must never be kept in bathrooms and similar
areas.