Input Button.
Source will be switch to the next after pressing this button by the following cycle sequence: COAX -
BNC - AES - USB – IIS.
Menu Button.
DAC-X20 main menu is shown by pressing this button.
Four Directions Button.
In DAC-X20 main menu，different item can be explored by UP and DOWN buttons, and different
options in an item can be selected by LEFT and RIGHT buttons.
Return Button.
Return back to the main menu display.
Volume Decrease Button.
It can reduce volume only when DAC-X20 shows the main menu on the screen.
Volume Increase Button.
It can increase volume only when DAC-X20 shows the main menu on the screen.
Mute Button.
DAC-X20 will be muted when this button is pressed, and mute will be released after another
pressing.
Power Button.
This button is invalid, X20pro does not have the corresponding function.
Note
1) Operating distance of the remoter varies depending on the angle.
2) If there something blocks the remoter and the sensor, operation might be failed.
3) If the remoter will not be used for a long time (one month or longer), the battery is recommended to be removed.
4) If battery liquid leakage happens, battery compartment should be clean immediately and installed a new battery
5) This remoter might cause the wrong operation of other infrared-red controlled devices.
To Next Page
Loading...
