Guyson 2 - Daily Inspections

Operation &
Maintenance
Manual
Issue:
10
A6ML0066 – Euroblast SF Instruction Manual
Date:
05/2019
Page: 29
7.1 Daily
 Inspect breathers pads (see section 7.1.1)
 Inspect the viewing window, anti-frost sheet and illumination window (see section 7.1.2)
 Inspect all hoses for wear and damage (see section 7.1.3)
 Inspect pick up tube(s) and mixer box for wear and damage (see section 7.1.4)
 Inspect blast nozzles for uneven wear and bore size (maximum oversize is plus 20%) (see
section 7.1.5)
 Inspect door seals for wear (see section 7.1.6)
 Inspect hopper for signs of overspray wear (see section 7.1.7)
 Empty dust collector bin and check contents for quality of media, ensure good media is not
being wasted (see section 7.1.8)
 Top up media as required (see section 7.1.9)
 Clean the filters every four working hours (see section 7.1.10)
 Check compressed air filter (see section 7.1.11)
 Check earthing bonds are secure (see section 7.1.12)