GW Instek ASR-2000 Series - Page 20

20
Gain resolution
0.1 times
Accuracy
±5 % (DC, or 45Hz ~ 65 Hz, gain is at initial value,
with rate voltage output, no load)
ADD: Output voltage (V) = External signal input (V) x Gain (V/V) + Internal
signal source setting (V)
External Synchronous Signal or Line (AC+DC-SYNC, AC-SYNC)
Specification
Factory Default
Synchronization signal
source
External synchronization signal
(EXT) or Power input (LINE)
LINE
Synchronization
frequency range
40.00 Hz to 999.9 Hz
Input terminal
BNC connector
Input impedance
1 MΩ
Threshold of input
voltage
TTL level
Minimum pulse width
500 us
Nondestructive
maximum input voltage
±10 V
Resolution
0.01 / 0.1 Hz
Accuracy
±0.2 Hz