CONFIGURATION
155
5. To Delay by Time (Duration), press
Time from the side menu and set
the delay time.
10ns ~ 10s (by time)
Set to minimum
6. To Delay by Event, press Event
from the side menu and set the
number of events.
Using Pulse Width (Glitch) Trigger
1. Press the trigger Menu key.
2. Press the Type key from the lower
bezel menu.
3. Select Pulse Width from the side
menu. The pulse width (glitch)
trigger indicator appears at the
bottom of the display.
From left: source, polarity, when, coupling
4. Press Source from the lower bezel.
To Next Page
Loading...
