GW Instek GDS-2102A - Horizontal Position;Scale

MEASUREMENT
69
Waveform
Operation
The waveform can be moved or scaled in both Run
and Stop mode, but in different manners. For
details, see page 130 (Horizontal position/scale)
and page 137 (Vertical position/scale).
Horizontal Position/Scale
For more detailed configuration, see page 130.
Set Horizontal
Position
The horizontal position knob
moves the waveform left and
right.
POSITION
As the waveform moves, the display bar on the top
of the display indicates the portion of the
waveform currently shown on the display and the
position of the horizontal marker on the
waveform.
Position Indicator
The horizontal position is shown at the bottom of
the display grid to the right of H icon.
Select Horizontal
Scale
To select the timebase (scale),
turn the TIME/DIV knob; left
(slow) or right (fast).
TIME/DIV
Range
1ns/div ~ 100s/div, 1-2-5 increments