FUNCTION GENERATOR -SERIES
INSTRUCTION MANUAL
4).Please use a screwdriver to open the screw located at upper side of rear
panel. Therefore, the upper cover can pull toward the backside. In the
meantime, the upper cover is moved.
Note: If you want to install the upper cover, please reverse above steps.
7-3. Cleaning
To keep the instrument clean, wipe the case with a damp cloth and
detergent. Do not use abrasives or solvents.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
