SAVE/RECALL SETUP
SAVE/RECALL SETUP
Save Setup
Background
The front panel settings can be stored into one of
the four internal memories.
Contents
The following list shows the setup contents.
• Independent / tracking series / tracking parallel
mode
• CH1/CH2 knob selection
• Fine/coarse editing mode
• Output voltage/current level
The following settings are always saved as “off”.
• Output on/off
• Front panel lock/unlock
• Buzzer on/off
Panel operation
Press one of the 1~4 Memory
keys for 2 seconds, for example
memory 1. The panel settings
are saved in memory 1 and the
key LED turns on. When the
panel settings are modified, the
LED turns off.
Note
When a setting is stored, the output automatically
turns off.
41
To Next Page
Loading...
