LCR-800 Series User Manual
51
DELAY setting:
! Press F1/F2 key to select the white inverted characters “DELAY”.
! Key-in Delay value(0~99999ms) through panel keyboard.
! Press ↵
↵↵
↵ key. Please refer to Figure 8-12 below.
Figure 8-12
AVG setting:
! Press F1/F2 key to select the white inverted characters “AVG”.
! Key-in average value through panel keyboard.
! Press ↵
↵↵
↵ key shown as Figure 8-13 below. For further details, please refer to
4-5-7.
Figure 8-13
8-3. BIN Range Setting: Component Sorting Range
The step for BIN setting: (Please refer to Figure 8-14)
! When the SET BIN inverts to white character, press F3 key.
! Press F3 key to select C or D sorting (The selected is a primary parameter,
the other one is an assistant parameter.)
EXIT
SET BIN BIN SUM
MODE:C/D CIRCUIT:SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
:00000mS AVG : 1
CLR
Press
F2
key
to the each
item
DELAY
Press
F3
key
to delete the
values input
in error
EXIT
SET BIN BIN SUM
MODE:C/D CIRCUIT:SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS : 1
CLR
Press
F2
key
to the AVG
AVG
Press
F3
key
to delete the
values input
in error
To Next Page
Loading...
