LCR-800 Series User Manual
65
2) Option
Settings
Port: There are three Ports available for selection including
Com1, Com2 and Com3. The default value is Com1.
Baudrate: After online, there are five Baudrates available for
selection including 9600, 19200, 38400, 57600 and
115200. The default value is 38400
DataBits: There are 8 bits of Data bits and User can not change it.
Parity: None. User can not change it.
StopBits: There is only 1 Bit of StopBits, and User can not change it
(Figure 9-7).
Figure 9-7
3) Set Filename
This filename setting is the route for saving test result.
Driver: Set driver
Directory: Set directory
File_Name: Set file name with 4 alphabets or 4 numbers input.
To Next Page
Loading...
