Need help?Do you have a question about the GW Instek PSU 20-76 and is the answer not in the manual?
General| Power Rating | 1520W |
|---|---|
| Voltage Regulation | ≤ 0.01% + 3mV |
| Ripple & Noise (CC) | ≤ 3 mArms |
| Output Voltage | 0 ~ 20V |
| Output Current | 0 ~ 76A |
| Output Type | Single Output |
| Display | Digital |
| Interface | RS-232, USB |
| Operating Temperature | 0 ~ 40°C |
| Storage Temperature | -20 ~ 70°C |
| Model | GW Instek PSU 20-76 |
Provides safety rules for PSU operation, handling, and electrical connection.
Introduces the PSU series, its models, features, and included accessories.
Lists and explains the PSU's protection features and alarm types.
Explains fundamental PSU operation principles, modes, and considerations.
Guides on connecting the PSU, power up, and initial setup.
Instructions for connecting the power cord to the PSU.
Step-by-step guide on powering on and off the PSU.
Procedure to reset the PSU to its original factory default configuration.
Covers fundamental operations, including setting protection levels.
Explains how to operate PSU units in parallel or series configurations.
Details how to use test scripts for automated testing with the PSU.
Guide on setting Over Voltage, Over Current, and Under Voltage protection levels.
Steps to configure the PSU for Constant Voltage priority mode.
Introduces master-slave configuration for parallel PSU operation.
Steps to configure and operate PSU units in parallel.
Introduces series operation of PSU units for increased voltage or polarity.
Settings for USB and GPIB interfaces.
Guides on configuring PSU settings that are only accessible during power-up.
Settings for USB, GPIB, LAN, and UART interfaces.
Guides on configuring PSU settings that are only accessible during power-up.
Information on isolated analog control interfaces for PSU.
Overview and setup for USB, GPIB, UART, and LAN interfaces.
How to connect and control multiple PSU units.
Instructions for controlling multiple units using modern multi-drop mode.
Steps to configure the PSU for network connectivity.
Frequently asked questions and their answers regarding PSU operation.
Lists the default configuration settings for the PSU.
Detailed technical specifications for the PSU series, including output, modes, protection, and interfaces.
To Next Page
