Need help?Do you have a question about the GW Instek PSU Series and is the answer not in the manual?
General| Brand | GW Instek |
|---|---|
| Model | PSU Series |
| Category | Power Supply |
| Language | English |
Provides step-by-step instructions for connecting the PSU, including line voltage and power cord.
Details the procedure for turning the PSU on and off, including warm-up times.
Covers fundamental operations like setting output levels, priority modes, and panel lock.
Guides on configuring OVP, OCP, and UVL protection levels to safeguard the PSU and load.
Explains how to configure the PSU for CV priority mode, including slew rate selection.
Details the procedure for setting the PSU to CC priority mode with slew rate adjustments.
Introduces operating multiple PSUs in parallel for increased current or series for increased voltage.
Explains the master-slave configuration required for parallel PSU operation.
Details the wiring and connections for setting up PSUs in a master-slave parallel configuration.
Guides on configuring and operating PSUs in parallel using the master-slave setup.
Details settings like delay times and slew rates that affect normal PSU operation.
Explains settings that can only be configured during power-up, affecting initial PSU behavior.
Details the process of configuring power-on settings for CV, CC, output status, and master/slave modes.
Explains how to control PSU output voltage using an external voltage source (0-5V or 0-10V).
Guides on controlling PSU output current using an external voltage source.
Details how to control PSU output voltage using an external resistance.
Explains how to control PSU output current using an external resistance.
Introduces the isolated analog connectors for external control and remote monitoring.
Guides on controlling PSU output voltage using an isolated external voltage source.
Explains how to control PSU output current using an isolated external voltage source.
Details how to control PSU output voltage using an isolated external current source.
Explains how to control PSU output current using an isolated external current source.
Covers monitoring PSU output voltage and current using isolated analog options.
Guides on connecting and verifying the PSU's USB interface for remote control.
Details the configuration and testing procedures for using the GPIB interface.
Explains how to configure and verify the PSU's UART communication interface.
Covers connecting multiple PSU units using Legacy Multi-Drop and Multi-Drop modes.
Provides detailed steps for setting up and operating multiple PSUs in Legacy Multi-Drop mode.
Details the configuration and operation of multiple PSUs using the Multi-Drop mode.
Explains how to set up the PSU's Ethernet interface for remote control.
Guides on configuring the PSU as a web server and accessing its interface.
Details the setup and verification process for the PSU's socket server functionality.
Detailed technical specifications for the PSU series, covering output, modes, and performance.
Specific electrical parameters for the PSU's output voltage, current, and power ratings.
To Next Page
