GW Instek PSU Series - Parallel and Series Operation Modes

OPERATION
67
Parallel / Series Operation
This section describes the basic operations required to operate the
power supply in series or parallel. Operating the PSU series in
parallel increases the total current output of the power supply units.
When used in series, the total output voltage of the power supplies
can be increased.
When the units are used in parallel or in series, a number of
precautions and limitations apply. Please read the following
sections before operating the power supplies in parallel or series.
 Master-slave parallel overview → from page 68
 Parallel connection → from page 71
 Parallel operation → from page 75
 Master-slave parallel calibration → from page 77
 Master-slave Series overview → page 79
 Series connection → page 81
 Series operation → from page 82