Need help?Do you have a question about the GW Instek PSW 800-2.88 and is the answer not in the manual?
General| Model | PSW 800-2.88 |
|---|---|
| Category | Power Supply |
| Output Power | 800 W |
| Voltage Resolution | 10 mV |
| Current Resolution | 1 mA |
| Load Regulation (CV) | ≤ 0.01% + 5 mV |
| Load Regulation (CC) | ≤ 0.01% + 5 mA |
| Line Regulation (CV) | ≤ 0.01% + 5 mV |
| Line Regulation (CC) | ≤ 0.01% + 5 mA |
| Ripple and Noise (CV) | 5 mVrms |
| Interface | USB, RS-232 |
| Display | 4.3" LCD |
| Operating Temperature | 0 ~ 40 °C |
| Storage Temperature | -20 ~ 70 °C |
Guides on connecting power, installing filters, and initial setup.
Covers essential operations like setting OVP/OCP and CV/CC modes.
Lists normal function settings, their parameters, and ranges.
Introduces analog control options for voltage/current using external signals.
Covers basic setup for USB, GPIB, and Ethernet interfaces.
Provides detailed technical specifications for various PSW models.
To Next Page
