Need help?Do you have a question about the GW Instek PSW 80-13.5 and is the answer not in the manual?
General| Model | PSW 80-13.5 |
|---|---|
| Category | Power Supply |
| Output Type | DC |
| Output Voltage | 0-80V |
| Output Current | 0-13.5A |
| Power Rating | 1080W |
| Voltage Resolution | 10mV |
| Current Resolution | 1mA |
| Input Voltage | 100-240V AC |
| Cooling | Fan |
| Input Frequency | 50/60Hz |
| Interface | USB, RS232, LAN |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 70°C |
| Voltage Accuracy | 0.05% + 10mV |
| Current Accuracy | ±0.1% + 5mA |
Describes symbols used in the manual and on the instrument for safety.
Provides essential rules to follow for safe operation and handling of the PSW.
Explains the voltage and current operating limits for PSW models.
Details the Constant Current (CC) and Constant Voltage (CV) operating modes.
Guides through the initial setup and connection of the PSW.
Covers fundamental operations of the PSW.
Instructions for operating multiple PSW units together.
A comprehensive list of configuration settings and their parameters.
Details on configurable settings like delay times and slew rates.
Settings that can only be configured during power-up.
Specific instructions for setting power-on configurations.
Introduction to controlling the PSW using analog signals.
How to control output voltage using an external voltage source.
How to control output current using an external voltage source.
How to control output voltage using an external resistance.
How to control output current using an external resistance.
How to monitor output voltage, current, and status remotely.
Details on monitoring VMON and IMON outputs.
Overview of configuring communication interfaces.
To Next Page