Need help?Do you have a question about the GW Instek PSW 80-40.5 and is the answer not in the manual?
General| Model | PSW 80-40.5 |
|---|---|
| Category | Power Supply |
| Output Voltage | 0-80V |
| Output Current | 0-40.5A |
| Voltage Resolution | 10mV |
| Current Resolution | 10mA |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Display | LCD |
| Current Accuracy | 0.1% + 20 mA |
| Ripple & Noise (CV) | ≤ 10mVrms |
| Ripple & Noise (CC) | ≤ 20mArms |
| Load Regulation (CV) | ≤ 0.01% + 5 mV |
| Line Regulation (CV) | ≤ 0.01% + 5 mV |
| Programming Interface | USB, LAN, RS-232, GPIB (optional) |
| Line Regulation (CC) | ≤ 0.01% + 5 mA |
Identifies safety symbols that may appear in the manual or on the instrument.
Provides essential guidelines for safe operation and handling of the PSW unit.
Details Constant Current (CC) and Constant Voltage (CV) modes and crossover points.
Covers line voltage connection, filter installation, and power-up procedures.
Explains fundamental operations like setting OVP/OCP, CV/CC modes, and panel lock.
Describes master-slave configurations for connecting units in parallel or series.
Lists and describes all available configuration settings (Normal, USB/GPIB, LAN, System).
Detailed explanation of settings like delay times, slew rates, and internal resistance.
Configuration settings that can only be changed during power-up.
Introduction to analog control options, connector pin assignments, and remote control modes.
How to control voltage and current output using external voltage sources.
How to control voltage and current output using external resistance.
Monitoring voltage, current, operation mode, and alarm status remotely.
Detailed technical specifications for 360W, 720W, and 1080W PSW models.
To Next Page