Need help?Do you have a question about the GW Instek PSW Series and is the answer not in the manual?
General| Ripple & Noise (CC) | ≤ 3mArms |
|---|---|
| Protections | OVP, OCP, OTP |
| Remote Sense | Yes |
| Programmable | Yes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Voltage Resolution | 1mV |
| Current Resolution | 1mA |
| Current Accuracy | ±0.1% + 10mA |
| Ripple & Noise (CV) | ≤1mVrms |
| Load Regulation (CC) | ≤0.1% + 5mA |
| Line Regulation (CC) | ≤0.1% + 5mA |
| Remote Interface | USB, RS232 |
| Display | LCD |
Explains safety symbols used in the manual and on the instrument.
Outlines general safety guidelines for using the PSW power supply.
Provides an overview of the PSW series, including model lineup and specifications.
Details the front and rear panel layout and components of the PSW units.
Highlights key performance and operational features of the PSW series.
Lists standard and optional accessories for the PSW series.
Details the rear panel connectors and ports of the PSW power supply.
Describes the voltage and current ranges and power limits of the PSW units.
Explains selectable slew rates for CC and CV modes and their priority settings.
Describes the function of the bleed resistor in dissipating capacitor power.
Details how internal resistance can be user-defined to simulate power sources.
Lists protection features like OVP, OCP, OTP, and their alarm outputs.
Explains output terminal grounding and floating configurations.
Details procedures for connecting power, installing filters, and powering up the unit.
Explains fundamental operations like setting OVP/OCP, CV/CC modes, and panel lock.
Describes how to operate multiple PSW units in parallel or series configurations.
Explains how to run, load, and save test scripts for automated testing.
Lists and describes various normal function, USB/GPIB, LAN, and system settings.
Explains how to change settings that apply during power-up.
Introduces analog control options for output voltage, current, and power switch.
Guides on controlling output voltage using an external voltage source.
Guides on controlling output voltage using an external resistance.
Explains how to monitor output voltage and current using the MIL-26 connector.
Covers basic setup for USB, GPIB, and Ethernet interfaces for remote control.
Explains how to configure Ethernet settings for remote control and monitoring.
Provides instructions for using Realterm to establish a remote connection via USB.
Details the steps for replacing front and side panel dust filters to maintain performance.
Lists the factory default configuration settings for the power supply.
Lists and explains error messages and operational messages displayed on the PSW.
Lists technical specifications for the 360W models of the PSW series.
Lists technical specifications for the 720W models of the PSW series.
Lists technical specifications for the 1080W models of the PSW series.
To Next Page
