GW Instek PSW Series User Manual

PSW Series User Manual
138
COMMUNICATION
INTERFACE
This chapter describes basic configuration of
IEEE488.2 based remote control. For a command
list, refer to the programming manual,
downloadable from GW Instek website,
www.gwinstek.com
Interface Configuration .................................................. 139
USB Remote Interface .......................................................................................... 139
Configure GPIB Interface .................................................................................... 139
Configure Ethernet Connection .......................................................................... 141
Web Server Configuration ...................................................................... 141
Sockets Server Configuration ................................................................. 142
USB Remote Control Function Check ............................................................... 143
Using Realterm to Establish a Remote Connection .......................................... 144
Web Server Remote Control Function Check ................................................... 148

GW Instek PSW Series Specifications

General

Ripple & Noise (CC)	≤ 3mArms
Protections	OVP, OCP, OTP
Remote Sense	Yes
Programmable	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Voltage Resolution	1mV
Current Resolution	1mA
Current Accuracy	±0.1% + 10mA
Ripple & Noise (CV)	≤1mVrms
Load Regulation (CC)	≤0.1% + 5mA
Line Regulation (CC)	≤0.1% + 5mA
Remote Interface	USB, RS232
Display	LCD