GW Instek PSW Series User Manual

OPERATION
87
Test Scripts
This section describes how to use the Test function to run, load and
save test scripts for automated testing. The Test function is useful if
you want to perform a number of tests automatically. The PSW test
function can store ten test scripts in memory.
Each test script is programmed in a scripting language. For more
information on how to create test scripts, please contact GW Instek.
 Test Script File Format→ from page 88
 Test Script Settings → from page 88
 Setting the Test Script Settings → from page 89
 Load Test Script → from page 90
 Run Test Script (Manually) → from page 91
 Run Test Script (Automatically at startup) → from page 92
 Export Test Script → from page 93
 Remove Test Script → from page 94
 Check the Available Memory Capacity → from page 95

GW Instek PSW Series Specifications

General

Ripple & Noise (CC)	≤ 3mArms
Protections	OVP, OCP, OTP
Remote Sense	Yes
Programmable	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Voltage Resolution	1mV
Current Resolution	1mA
Current Accuracy	±0.1% + 10mA
Ripple & Noise (CV)	≤1mVrms
Load Regulation (CC)	≤0.1% + 5mA
Line Regulation (CC)	≤0.1% + 5mA
Remote Interface	USB, RS232
Display	LCD