PSW Series User Manual
148
Web Server Remote Control Function Check
Enter the IP address of the power supply in a
web browser after the instrument has been
configured as a web server (page 141).
http:// XXX.XXX.XXX.XXX
The web browser interface appears.
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
Socket Server Function Check
To test the socket server functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available
on the NI website, www.ni.com., via a search
for the VISA Run-time Engine page, or
“downloads” at the following URL,
http://www.ni.com/visa/
Firmware: V1.12
Operating System: Windows XP, 7
To Next Page
Loading...
