Need help?Do you have a question about the GW Instek G PS-3030D and is the answer not in the manual?
General| Output Voltage | 0 - 30V |
|---|---|
| Output Current | 0 - 3A |
| Power Rating | 90W |
| Line Regulation | ≤0.01% + 3mV |
| Ripple & Noise | ≤ 1mVrms |
| Voltage Regulation | ≤ 0.01% + 3mV |
| Ripple and Noise (CC) | ≤3mArms |
| Display Type | LED |
| Dimensions | 260 x 150 x 220 mm |
| Weight | Approx. 5kg |
| Display Accuracy (Current) | ±1% + 3 digits |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 70°C |
| Display | LED |
Main supply voltage, rating, dimension, and weight details.
Output voltage adjustment, regulation, recovery time, ripple & noise.
Output current adjustment, regulation, ripple & noise.
Digital type display and accuracy for voltage and current.
Insulation resistance between terminals and chassis.
Description of front panel controls and indicators.
Description of rear panel connectors and switches.
Safety and installation precautions for operation.
Procedure for setting the maximum output current limit.
Describes the automatic crossover behavior between CV and CC modes.
Instructions for single, series, and parallel operation modes.
Procedure and precautions for replacing the fuse.
Steps to change the unit's AC input voltage setting.
Guidelines and procedures for recalibrating voltage and current.
Recommended methods for cleaning the power supply.
To Next Page