To Next PageTo Next Page
Need help?Do you have a question about the GW Instek SPS Series and is the answer not in the manual?
General| Model | SPS Series |
|---|---|
| Output Channels | Single |
| Output Power | Up to 360W (depending on model) |
| Output Voltage | Up to 60V (depending on model) |
| Output Current | Up to 10A (depending on model) |
| Ripple and Noise | < 1mVrms |
| Line Regulation | < 0.01% + 3mV |
| Load Regulation | < 0.01% + 3mV |
| Protection | Overload, Overvoltage, Overtemperature |
Details main supply voltage, ratings, dimensions, weight, and operating environment.
Details output voltage range, regulation, recovery time, ripple, and temperature coefficient.
Details output current range, regulation, and ripple/noise characteristics.
Describes the display and accuracy for voltage and current meters.
Specifies the range for over voltage protection settings.
Defines insulation resistance requirements between chassis and terminals/cords.
Instructions for unpacking and inspecting the instrument for damages.
Guidance on verifying line voltage and setting the voltage selector before connecting.
Normal ambient temperature range and avoiding magnetic/electric fields.
Ensuring proper ventilation and operating within specifications.
Overview of the SPS system's main functional blocks and their interconnections.
Lists components for each circuit configuration within the SPS system.
Explains specific circuit functions like voltage reference, adjustment, and current control.
Describes all controls and indicators located on the front panel of the power supply.
Details connections and controls found on the rear panel, including power socket and fan.
Covers essential precautions for AC input and installation environment.
Guidance on selecting appropriate output and feedback test leads for safety.
Procedure for determining and setting the maximum safe current limit for the device.
Explains the automatic crossover characteristic between voltage and current modes.
Step-by-step guide for operating the power supply in voltage mode.
Instructions for replacing a blown fuse, emphasizing safety and correct rating.
Procedure for converting the power supply between 115V and 230V line voltages.
Guide for internal adjustments and calibration of voltage, current, and OVP.
Guidance on cleaning the power supply using soft cloths and mild detergent.
