Need help?Do you have a question about the GW Instek PSU 40-38 and is the answer not in the manual?
General| Brand | GW Instek |
|---|---|
| Model | PSU 40-38 |
| Category | Power Supply |
| Language | English |
Explains symbols used in the manual and on the instrument.
Provides general guidelines for safe operation and handling of the PSU.
Instructions for cleaning the power supply unit safely.
Specifies the recommended environmental conditions for operating the PSU.
Guidelines for the proper disposal of the instrument.
Safety instructions for connecting the power cord in the UK.
Provides an overview of the PSU series, including model lineup and capacities.
Describes the physical layout, front panel, and rear panel of the PSU.
Explains the basic principles of operation, protection modes, and considerations.
Explains the Constant Current (CC) and Constant Voltage (CV) operating modes of the PSU.
Explains output terminal isolation and considerations for protective ground or floating connections.
Provides instructions for connecting the power supply and initial setup procedures.
Details essential operations like setting protection levels and panel lock.
Guides on operating multiple PSU units in parallel or series for increased output.
Explains how to use the Test function to run, load, and save automated test scripts.
Overview of the PSU's configuration settings divided into five main categories.
Details settings like Output ON/OFF delay time and slew rates.
Covers settings for USB, GPIB, LAN, and UART interfaces for remote control.
Includes settings for factory defaults and viewing system version information.
Settings that can only be configured during power up, like CV/CC control modes.
Configuration for trigger inputs and outputs, including pulse width and source.
Overview of analog control options for voltage/current using external voltage or resistance.
Details the 25-pin analog control connector and its pin assignments.
How to control PSU voltage using an external voltage source.
How to control PSU current using an isolated external current source.
Explains support for monitoring output voltage, current, operation, and alarm status.
Overview of isolated analog control options for external control and remote monitoring.
Lists the default factory configuration settings for various PSU parameters.
Lists and explains error, normal, and communication interface messages displayed by the PSU.
Detailed technical specifications for the PSU series, including output, modes, and protection.
Provides physical dimensions and mounting information for different PSU models.
Declares CE marking compliance and lists relevant EMC and safety standards.
To Next Page
