Need help?Do you have a question about the GW Instek PSU 300-5 and is the answer not in the manual?
General| Brand | GW Instek |
|---|---|
| Model | PSU 300-5 |
| Category | Power Supply |
| Language | English |
Explains warning and caution symbols used in the manual.
Lists general guidelines for safe operation and handling of the PSU.
Provides instructions and precautions for cleaning the power supply unit.
Specifies environmental conditions for PSU operation and storage.
Guides on proper disposal of the electronic equipment.
Safety instructions for connecting the power cord in the UK.
Provides an overview of the PSU series, including models, features, and accessories.
Details the front panel components and display of the PSU.
Describes the connectors and ports on the rear of the PSU.
Explains the basic principles of operation, protection modes, and considerations.
Covers line voltage connection, power up, wire gauge, and terminal setup.
Details setting protection levels, priority modes, panel lock, save/recall, and voltage sense.
Explains how to operate PSU units in parallel or series for increased output.
Describes how to run, load, save, and manage test scripts for automated testing.
Outlines and lists the different configuration settings available for the PSU.
Covers settings like delay times, slew rates, internal resistance, and bleeder control.
Details settings for USB, GPIB, LAN, and UART interfaces.
Includes settings for factory defaults, version display, and system parameters.
Configures control modes, output status, and master/slave settings at power-on.
Configures how the PSU responds to external triggers and generates trigger outputs.
Accesses calibration, firmware updates, and other special functions.
Explains controlling output voltage/current via external voltage or resistance.
Details the pin assignments and descriptions of the analog control connector.
How to control output voltage and current using an external voltage source.
How to control output voltage and current using an external resistance.
Explains how to turn the output on/off using an external switch.
Describes how to shut down the power supply using an external switch.
Covers monitoring of output voltage, current, operation, and alarm status.
Details specifications and usage of isolated analog control interfaces.
Covers configuration for USB, GPIB, UART, and Ethernet interfaces.
Guides on configuring and checking the USB remote interface.
Explains how to configure and check the GPIB remote interface.
Details configuring and checking the UART remote interface.
Explains Legacy Multi-Drop and Multi-Drop modes for daisy-chaining units.
Covers configuring the Ethernet interface for remote control and web server access.
Details configuring the PSU as a socket server for network communication.
Addresses why OVP voltage might trigger earlier than expected.
Discusses combining cables for output wiring and considerations.
Provides steps to ensure the PSU meets its accuracy specifications.
Lists the default factory settings for various PSU parameters.
Lists and explains common error and normal messages displayed by the PSU.
Provides detailed electrical and performance specifications for all PSU models.
Shows the physical dimensions of the PSU units.
Documents the product's compliance with various safety and EMC standards.
To Next Page
