Need help?Do you have a question about the GW Instek SPS-1230 and is the answer not in the manual?
General| Output Voltage | 0 - 12V |
|---|---|
| Power Rating | 360 W |
| Display | LED |
| Line Regulation | 0.01% + 3 mV |
| Input Voltage | AC 100 to 240 V |
| Interface | RS-232 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
| Load Regulation | 0.01% + 3 mV |
| Ripple & Noise (CC) | 3 mArms |
Provides general guidelines for safe operation, handling, and maintenance of the power supply.
Detailed explanation of the controls, indicators, and displays on the front panel.
Identifies and explains the functions of connectors and controls on the rear panel.
Details the procedure for setting the Over Voltage Protection (OVP) limit.
Step-by-step guide to setting the desired current limit for the output.
Describes the procedure for operating the power supply in Constant Voltage mode.
Details the procedure for adjusting the power supply's output voltage to its rated value.
Details the procedure for adjusting the power supply's output current to its rated value.
Lists the technical specifications and ratings for the SPS series power supplies.
To Next Page
