Need help?Do you have a question about the GW Instek SPS-606 and is the answer not in the manual?
General| Power Rating | 360 W |
|---|---|
| Output Voltage | 0 to 60 V |
| Output Current | 0 to 6 A |
| Ripple and Noise (CV) | 1 mVrms |
| Load Regulation | 0.01% + 3 mV |
| Line Regulation | 0.01% + 3 mV |
| Voltage Regulation | < 0.01% + 3mV |
| Display | LED |
| Interface | RS-232 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20°C to 70°C |
Explains safety symbols used in the manual and on the product.
Details AC input voltage and frequency requirements for the power supply.
Provides cleaning instructions and lists environmental conditions for optimal operation.
Highlights key features and introduces front/rear panel layouts.
Explains automatic switching between Constant Voltage (CV) and Constant Current (CC) modes.
Presents a chart showing current output percentage versus environment temperature.
Covers initial installation, powering up, and setting Over Voltage Protection.
Details the procedure for operating the power supply in Constant Voltage (CV) mode.
Introduces performance checks, lists verification items, and required equipment.
Provides a step-by-step guide for replacing the fuse.
To Next Page
